Power Cables

PDP manufactures high-voltage power cables up to 35 KV, which are used extensively by MERALCO and the National Power Corporation to deliver electric power to residential and commercial areas throughout the country. These cables are used for primary underground distribution and are suitable for use in wet or dry locations, direct burial, underground ducts, and aerial installation.

Description
Stranded copper conductor, PE or PVC insulated & PE or
PVC jacketed (shielded or unshielded)

Use or Application
For aerial, duct, or direct burial power distribution service
or for series street lighting.
Voltage/Max. Operating Temp. Up to 5000 V/75 ‘C

Standard Packaging: In reels
Specs: ICEA S-61-402

Description
Underground feeder and branch circuit cable, direct burial, 600 V/60 C

Use or Application
For exposed or concealed installation. Voltage/Max. Operating Temp. 600 V/60 ‘C

Standard Packaging: In reels
Specs:
PHELPS DODGE, ICEA S-61-402

Description
Stranded copper conductor dry-cured cross-linked polyethylene (XLPE) insulated, shielded or unshielded (copper tape or concentric neutral) PVC or PE jacketed.

Use or Application
For aerial, duct, or direct burial bulk powder distribution
service, and load centers.
Voltage/Max. Operating Temp. Up to 35000 V/90 ‘C

Standard Packaging: In reels
Specs: AEIC S5C, ICEA S-66-524

Description
Natural high molecular weight Polyethylene or XLPE insulation and high density black polyethylene or XLPE jacket.

Use or Application
Overhead distribution system.
Voltage-6.24 KV-34.5 KV

Standard Packaging: In reels
Specs: ICEA S-61-402, CUST. SPEC.